Weight Indicator XK3118K8

 Weight Indicator XK3118K8 is high quality product from SNK – Keli.

 XK3118K8 indicator contains the following 6 different model numbers:

 XK3118K8A: Rubber keystroke common type.

 XK3118K8AP: Rubber keystroke set internal thermal micro printer type.

 XK3118K8AP1: Rubber keystroke set internal dot matrix micro printer type.

 XK3118K8B: Stainless steel keystroke common type.

 XK3118K8BP: Stainless steel keystroke set internal thermal micro printer type.

 XK3118K8BP1: Stainless steel keystroke set internal dot matrix micro printer type

Weighing indicator XK3118K8 adopts high precision ∑-Δ A/D conversion technology, widely applied in electronic floor scale, electronic truck scale, static railway scale and so on alike static weighing system equipped with 1~8 load cell.

 Technical parameter

 Class: OIML Class III, N=5000, GB/T 7724-2008.

 A/D conversion method: ∑-Δ.

 A/D conversion speed: 200 times/sec.

 Input signal range: -30 mV ~ +30 mV.

 Max. connection number of load cell: 12pcs at 350 ohm or 24pcs at 700 ohm.

 Load cell connection mode: 6 wire, auto compensation for distance ≤ 50 meters.

 Verified counts: 3.000.

 Readability:30.000.

 Max.internal resolution: 15.000.000.

 Display: 7 bits LED display 7 status indications, 3 power indicators.

 Clock: real clock without effect when power off.

 Scoreboard interface (Standard): Serially sending by 20mA current loop with baud rate 600, transmission distance ≤ 2.000 meters.

 Communication interface (RS232 C standard; RS422 optional): Serial communication interface, with selectable baud rate by continuous sending method or on command method.

 Print interface (Standard): Parallel sending, able to connect with wide-line printer model KX-P1121, KX-P1131, LQ300K.

 Power supply: AC 187 ~ 242V, 49~51Hz; DC 6V/10Ah battery.

 Connect Load cell with Jack Load cell DB9 (9 pin) on D10M

 Shorted #1 & #2, #6 & #7 when Load cell  4 core.